 |
|
|
|
|
|
1/2 inch capacity, 6.2 amp motor, 600 RPM
|
|
|
|
1/2 inch keyed chuck
|
|
|
|
Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
|
|
|
|
Develops up to 1650 pounds of drill point pressure with a 1 inch steel plate
|
|
|
|
|
|
 Voltage
|
120 AC Only
|
|
Drill Capacity
|
1/2 in.
|
|
Amps
|
6.2
|
|
No Load Speed
|
600 RPM
|
|
Tap Capacity
|
5/8 in.-18
|
|
Drill Point Pressure
|
1,610/1,650 lbs.
|
|
Chuck or Taper
|
Chuck
|
|
Tool Weight
|
8.0 lbs.
|
|
Shipping Weight
|
9.7 lbs.
|
|
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
|
Back
Owner's Manual
Related Articles
Zoom
Where To Buy
Email To A Friend
